ISO 3065:2021 pdf download.Essential oil of Eucalyptus, Australian type.
This document specifies certain characteristics of the essential oil of Eucalyptus, Australian type, with a view to facilitating the assessment of its quality.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/TS 210, Essential oils — General rules for packaging, conditioning and storage
ISO/TS 211, Essential oils — General rules for labelling and marking of containers
ISO 212, Essential oils — Sampling
ISO 279, Essential oils — Determination of relative density at 20 degrees C — Reference method
ISO 280, Essential oils — Determination of refractive index
ISO 592, Essential oils — Determination of optical rotation
ISO 875, Essential oils — Evaluation of miscibility in ethanol
ISO 11024 (all parts), Essential oils — General guidance on chromatographic profiles
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1 essential oil of Eucalyptus, Australian type
essential oil containing a volume fraction in the range above 80 % of 1,8-cineole, obtained by steam distillation of foliage of eucalyptus
Note 1 to entry: The foliage of eucalyptus is from primarily Eucalyptus polybractea R. Baker, E. radiata Sieber ex DC. ssp. radiata, E. smithii R. Baker, E. plenissima (C. Gardner) Brooker, E. kochii Maiden and Blakely and other eucalyptus species rich in 1,8-cineole.
Note 2 to entry: For information on the CAS number, see ISO/TR 21092.
4 Requirements
4.1 General requirements
Essential oil of Eucalyptus, Australian type, shall meet the requirements given in Table 1.
4.2 Chromatographic profile
Carry out the analysis of the essential oil by gas chromatography. Determine the chromatographic profile in accordance with ISO 11024 (all parts). Identify in the chromatogram obtained the representative and characteristic components shown in Table 2. The proportions of these components, indicated by the integrator, shall be as shown in Table 2. This constitutes the chromatographic profile of the essential oil.
5 Flash point
Information on the flash point is given in Annex B.
6 Sampling
Sampling shall be performed in accordance with ISO 212. The minimum volume of the test sample is 50 ml.
NOTE The volume allows each of the tests specified in this document to be carried out at least once.
7 Packaging labelling, marking and storage
These items shall be in accordance with ISO/TS 210 and ISO/TS 211.ISO 3065 pdf download.ISO 3065 pdf download
