BS ISO 22915-5:2014 pdf download.Industrial trucks — Verification of stability Part 5: Single-side-loading trucks
This part of ISO 22915 specifies the tests to verify the stability of single-side-loading trucks with tiltable or non-tiltable mast or fork arms. It is applicable to trucks fitted with fork arms and/or attachments.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3691-1, Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
ISO 22915−1, Industrial trucks — Verification of stability — Part 1: General
ISO 5053, Powered industrial trucks — Terminology
3 Terms and definitions
For the purpose of this document, the terms and definitions given in ISO 5053 and ISO 22915-1 and the following apply.
3.1 normal operating conditions when travelling
travelling with the mast or fork arms tilted backwards if capable and the load retracted and in the lowered (travelling) position or resting on the load carrying deck
4 Test conditions
4.1 General
See ISO 22915-1.
4.2 Position of the truck on the tilt table
The indication of the articulating steer axle is the centre line of the axle. The allocation of the indication is defined in Figure 1.BS ISO 22915-5 pdf download.BS ISO 22915-5 pdf download
